很多同學在做英語六級考試閱讀題的時候感到無從下手，一看閱讀文章中有一大片不認識的單詞，心中往往會出現恐慌和不知所措。這個時候，我們不能就此大退堂鼓，該怎麼做呢?想要提高閱讀的分數，在複習階段就必須擴充詞彙量，這是基礎中的基礎。此外，還要學會總結，這樣才能得出經驗。下面小編為大家搜尋整理了大學英語六級考試閱讀理解技巧，希望對大家有所幫助!
1、擴充詞彙量
雖然六級詞可以在文章中能夠利用技巧猜出，但強烈建議考生仍不能忽視平時詞彙量的積累。因為非要把平時可以搞定的單詞當成生詞去考場浪費時間精力來猜測處理是非常得不償失的辦法。當然，單純背單詞書效果比較差，尤其對那些恆心、毅力不強的考生。
所以這裡推薦一個適合提高閱讀部分單詞識記數量的`小方法：考生可以每天定量反覆掃讀六級大綱內的詞彙，同時進行六級閱讀真題的訓練或者找一些與六級閱讀文章難度相當的文章進行單詞回顧演練，這樣經過兩至三個月的時間，至少可以保證考生對大部分的高頻單詞進行了多次的“會面”，混了眼熟，也就達到了考綱要求的對於含義理解的層次要求了，當然，這需要一個不斷迴圈往復的掃讀-閱讀過程。
2、學會對六級不同考試題目的理解
不同的題目的指向是不同的，同時對考生的思維方向的要求是不同的。比如，考文章大意的題目實際上是考大家的歸納推理能力，而考細節的題目更多的是考察同學的英語閱讀能力。有的題目只需在原文中找到相關定位即可，有的題目則要求我們對全文或者某一段落的內容全面掌握。我建議大家平時複習時可以自己去歸納總結或體會不同題目的不同做法。當然，現在的培訓機構會給同學們分類，大家也可以不妨試試，提高自己的複習效率。
總之，分析出自己的問題出在哪再對症下藥，這樣複習起來既有效率又有效果，但是英語的提高不是一個短時間可以突飛猛進的事兒，所以還得需要各位考生平時多勤奮，因為六級對於大家而言只是人生面臨的諸多關卡之一，我相信同學們一定能將六級考試踩在自己的腳下。
【附：六級閱讀理解原文】In the last two hundred years there have been great changes in the method of production of goods. This is now also true of the building industry; for mechanization has been introduced. System building can save both time and money. The principle of system building is that the building is made from a set of standard units. These are either made at the building-site or at a factory. Some designers, in fact, are standardizing the dimensions of rooms. They are made in multiples of a single fixed length, usually ten centimeters. This is called a modular (標準件的) system, and it means that manufactures can produce standardized fittings at a lower cost. The most important fact about system building is its speed. A ten-storey flat, for example, can be completed in four months.
There are several new methods of system building. One is the panel method. In this case, the construction company sometimes erects a factory on the site. The walls and floors of the building, called panels, are cast in a horizontal or vertical position. Conduits for electrical wires and sleeves for pipes are cast in the panels when they are being made. The moulds for making these castings are situated all around the building.
After the concrete panels are cast, they are allowed to set and harden for a week. Next they are lifted by a tower crane on to any section of the building. There the panels are cemented together at their joints and the floor covering is laid.
After the panels have been cemented together, the crane lifts a case into the area. It contains all the fittings to be installed, such as wash-basins, radiators and pipes. Finishing tradesmen, such as plumbers, plasterers, painters and electricians, follow behind to complete the work.
In some building developments, in some countries, whole flats with internal features like their bathrooms, bedrooms and connecting stairs, and weighing as much as twenty tons, are carried to the building-site ready-made. A giant overhead crane is used to lift them into position. In the future, this method may become more widespread.
◆1. The main difference between panel method and the method discussed in the last paragraph is_______.
A. the latter uses ready-made internal features
B. panels are cast in a level position
C. the former is used to build walls and floors while the latter to construct bathrooms or bedrooms
D. the former is more expensive than the latter
◆2. Which of these statements is TRUE of system building?
A. It employs more men. B. It is difficult and dangerous.
C. It can save both time and money. D. It means less mechanization.
◆3. According to the passage, the principle of system building is that_______.
A. construction methods are safer
B. buildings are made from a set of standardized units
C. similar buildings can be produced
D. all units are produced on the site
◆4. The usual fixed length in the modular system is_______.
A. twenty centimeters B. ten millimeters
C. fifty centimeters D. ten centimeters
◆5. What lifts the concrete panels onto the building?
A. Cranes. B. Man-power.
C. Pulleys. D. Hydraulic jacks.
參考答案： 1. A 2. C 3. B 4. D 5. A
